Residues behavior of some fungicides applied on two greenhouse tomato varieties different in shape and weight

The degradation of 12 fungicides (azoxystrobin, cymoxanil, cyproconazole, cyprodinil, fenarimol, fludioxonil, iprovalicarb, mepanipyrim, penconazole, pyrimethanil, tolclofos-methyl, triadimenol), commonly used in pest management strategies on Sardinian greenhouse tomato crops was studied. A different residue behaviour was observed between the studied cultivar. On the smaller, a “cherry” type tomato, field data showed an initial residue mostly higher than the “beefsteak” tomato. In any case, except for penconazole, all pesticide residues were below their maximum residue levels (MRLs) reaching the pre-harvest interval (PHI). On both cultivar, triadimenol and cymoxanil residues completely disappeared reaching their PHI, while iprovalicarb, fenarimol, and fludioxonil disappeared in a time of 17 to 24 days. On the contrary, azoxystrobin, cyproconazole, cyprodinil, penconazole, tolclofos-methyl, mepanipyrim, and pyrimethanil showed a long persistence on both tested cultivar and may have residual problems due to an accumulation effect if repeated field treatments will be performed. The first group of molecules according to their rapid degradation could be used in low pesticide-input management in order to obtain tomatoes with low or no detectable residues.     

Determination of 28 pesticides applied on two tomato cultivars with a different surface/weight ratio of the berries,using a multiresidue GC-MS/MS method

The behavior of 28 pesticides on two tomato cultivars with a different surface/weight (S/W) ratio of the berries (S/W, Birikino vs. Tombola) was studied, in order to provide appropriate indications about their persistence on crops reaching the pre-harvest interval (PHI). Quantitative analysis was performed using a GC MS/MS method. Birikino cv. (BIR) was a “cherry type tomato” with a double S/W ratio compared with Tombola cv. (TOM). The results showed a different pesticide behavior. Azoxystrobin, Boscalid, Bupirimate, Difenoconazole, Etofenprox, Iprodione, Mepanipyrim, Myclobutanil, Tebuconazole, Zoxamide, Metalaxyl M, Pyrimethanil, Tetraconazole, Benalaxyl, Cyprodinil, Fenamidone, Famoxadone and Fludioxonil immediately after treatments showed residues on BIR higher than TOM, and this behavior is consistent with its greater exposed surface. BIR showed higher decay rates of these pesticides during the whole trial, nevertheless residue averages remained higher than TOM reaching the time of harvest. Residues at the PHI were all below their Maximum Residue Levels (MRLs), but data indicated that they could exceed their legal limits especially if the above-mentioned active ingredients were employed more than once per crop cycle on cherry type tomatoes. As regards to Chlorpyrifos, Chlorpyrifos methyl, Triadimenol, Pyridaben and Tebufenpyrad, no different residual behavior related to S/W ratio of the cultivars was observed. Even in this case, residues at the PHI were all below MRLs. As for Cyfluthrin, Deltamethrin, Lambda cyhalothrin, Etoxazole and Cyproconazole, residues were lower than the limit of quantitation (LOQ) of the analytical method just after the treatment, according to their low doses of employment.     

Serum levels of PCDDs, PCDFs and PCBs in non-occupationally exposed population groups living near two incineration plants in Tuscany, Italy

A pilot study was carried out in Tuscany, Italy, to provide preliminary information on the concentrations of polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorobiphenyls (DL-PCBs), and selected non-dioxin-like PCBs (NDL-PCBs) in groups of subjects living in the vicinity of two incineration plants. Seventy-four volunteers were enrolled from areas identified as under a potential impact from incinerator emissions and from not exposed areas. No significant differences were observed between subjects living in the two types of areas. Total concentrations of PCDDs, PCDFs, and DL-PCBs resulted to be in the range 23-30 pg WHO-TEQ g(-1), lipid base, for subjects in the 27-54 year age groups, while concentrations increased to 40-44 pgTEQ g(-1) for the two 55-67 year age groups. The levels of PCDDs and PCDFs were in good agreement with those observed for unexposed population groups in Italy, while the contribution to total TEQ from DL-PCBs was appreciably higher than those currently observed in the general population in Italy and other countries. As to NDL-PCBs, serum levels of the six "indicator" congeners were in the range 240-300 ng g(-1), lipid base, for subjects in the 27-54 year age groups. A raise in NDL-PCB body burden (430-470 ng g(-1), lipid base) was observed for the two 55+ year age groups, in agreement with the expected age-dependent increase. The findings from this study do not show an incremental exposure to PCDDs and PCDFs in the samples from subjects living around the two incineration plants, whereas PCB congener profiles in all samples suggest a possible impact on the area of interest of industrial activities from near industrial settlements.     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-the Mediterranean region

Outstanding features of Mediterranean forest area are highlighted with a special reference to biodiversity and connections with forest management. The naturally originated and anthropogenic progress of the mosaic-like evolution, as well as the man-induced factors and natural constraints are described. The past and present close linkages between management and biodiversity are then analysed by means of a few, outstanding cases typical of the geographical region. The management shift on increasing economically marginal forest area (abandonment) appears to be the major force currently driving connections with inherent and associated biodiversity. The goals following the new-established environmental roles of forests have shifted towards adaptive management, namely the implementation of locally tailored rules in accordance with prominent forest functions. Key priorities to face up to the new scenarios are then discussed.Economic and policy implications are addressed with reference to multipurpose forestry and the related annual flow of outputs. It is shown the role of water-related services, as well the provision of various non-wood forest products and public goods in addition to wood and other traditional forest outputs. Reference is also made to the dualism between the Northern and the South-Eastern Mediterranean countries due to different level of economic development (and pressure of forest resources) together with very different institutional structures, i.e. public ownership in Southern and South-Eastern Mediterranean countries. Nevertheless, the situation is going to become more harmonious in the medium run by growing economic development, the affirmation of local rights on forest resources, globalisation and, above all, rural out migration and exchanges of peoples confirming the traditional role of the Mediterranean Region at cross road of South-North and Eastern-Western cultures.     

Occurrence of potential bacterial pathogens in coastal areas of the Adriatic Sea

A monitoring program was carried out in bathing waters along the sea-coast of the Adriatic Sea. The investigation was aimedat obtaining a quali-quantitative picture of microorganisms ofanthropic origin and of a more strictly autochthonous origin and at verifying the existence of possible reciprocal correlations and combinations of relationship between them. Results showed that the concentrations of indicators of faecal contamination, whether within or over the values established by legislation, are not always related to the presence and density of microorganisms of environmental origin but the regression modelsused can help to describe how these latter microorganisms can bein relation to levels of the other parameters. The difficultyis evident of the predictability of health effects swimming-associated; for this reason more complex models that are currently used should be taken into account for minimising the risk for bathers.     

Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing

Increasing awareness of environmental and energy problems has promoted greater governmental interest in selected waste collection and consequently has attracted the interest of several research groups to the challenge of converting recovered plastics into useful materials. The reactive blending of postconsumer polyethylene terephthalate (PET) with different polyolefins (PO) was studied in attempts to obtain a new material with enhanced properties with respect to the starting materials. The success of the project depends mainly on the possibility of obtaining a compatibilized blend between two starting polymers that, from chemical and thermomechanical viewpoints, are very different. This was approached by employing polyolefins bearing functional groups capable of specific interaction or chemical reaction with PET end groups. Ternary blends of very low density polyethylene (VLDPE)/PET/functionalized polyolefin (FPO) in a weight composition of 70/20/10 and binary blends of FPO/PET in a weight composition of 90/10 were prepared and studied to obtain reinforced polyolefin thermoplastic materials. Reactive blending was achieved in a Brabender Plastograph with a mixing chamber of 30 or 50cm³, at 250°C, and 40rpm for 10min. Differential scanning calorimetry, scanning electron microscopy, and tensile tests were used to investigate the phase behavior, the efficiency of compatibilization, and the mechanical properties of the blends.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.